Mechanical Seals:10 SERIES

These mechanical seals are designed to cater to need of all common application of clean as well as turbid fluids. These seals are used where the fluids are to be handled are crude and slurry in nature with characteristic of crystalline, turbid, viscous and sticky. The mechanical seals are very useful where the fluid services are contaminated with foreign particles. The spring design of this seal is proven excellent for fluids of crystalline nature working at various temperature and fluids with higher viscosity or with sticky nature.

Mechanical seals after being manufactured pass through various strict quality control parameters to withstand highly critical service condition and to match with international quality.

DESIGN FEATURES
APPLICATION	For Viscous and Abrasive application. High pressure, viscous and abrasive.
ROTARY SEAL FACE	C, TC, SiC,Steel.
STATIONARY SEAL FACE	C, TC, SiC, Ceramic.
TYPES OF SEALS	TYPE 10UV 10UT 10BV 10BT TEMPERATURE (°C) - 45 to 200 - 45 to 200 - 45 to 200 - 45 to 200 PRESSURE upto 10 bar upto 10 bar upto 40 bar upto 40 bar
SPEED	3000 RPM
AVAILABLE SIZES	0.75" to 4 "

Mechanical Seals:20 SERIES

These mechanical seals are designed to most commonly used applications of clean fluid services. These seals are used where the fluids to be handled are clean and crystal clear like finish products. This Mechanical seals are very useful where the fluids services are contamination free from foreign particles. The multiple spring design of these seals is proven excellent for handling of fluids like clean liquids and gases at various temperature and pressure.

DESIGN FEATURES
APPLICATION	For almost all chemicals and hydrocarbons fluids and gases. For almost all chemicals and hydrocarbons fluids and gases with high pressure.
ROTARY SEAL FACE	C, TC, SiC.
STATIONARY SEAL FACE	TC, SiC, CER, STELLITE.
TYPES OF SEALS	TYPE 20UV 20UT 20BV 20BT TEMPERATURE (°C) -50 to 280 -80 to 400 -50 to 280 -80 to 400 PRESSURE upto 10 bar upto 10 bar upto 40 bar upto 40 bar
SPEED	4500 RPM
AVAILABLE SIZES	0.75" to 6"

Mechanical Seals:30 SERIES

These mechanical seals are designed to most commonly used applications of fluid services like clean liquids with trace amount foreign particles. This Mechanical seals are also useful where the fluids services are with contamination in trace form. The external mounted multiple spring design of these seals is proven excellent for handling of fluids like clean liquids and gases at various temperature and pressure.

DESIGN FEATURES
APPLICATION	For all chemicals, acids and corrosive fluids. For all chemicals, acids and corrosive fluids with high pressure application.
ROTARY SEAL FACE	C, TC, SiC.
STATIONARY SEAL FACE	TC, SiC, CER, STELLITE.
TYPES OF SEALS	TYPE 30UV 30UT 30BV 30BT TEMPERATURE (°C) -50 to 280 -80 to 400 -50 to 280 -80 to 400 PRESSURE upto 10 bar upto 10 bar upto 40 bar upto 40 bar
SPEED	4500 RPM
AVAILABLE SIZES	0.75" to 6"

Mechanical Seals:40 SERIES

40 TB:
These mechanical seals are designed to cater the need of Specific applications. These seals are supported by PTFE bellow for critical application of highly corrosive services like acidic and alkaline product handling. These seals are proven excellent in the area of concentrated acids, strong alkalis, and various high corrosive and toxic chemicals. We are offering replaceable Glass filled PTFE seal ring which can be used both the sides to give double life to the seal.


40 RB:
These mechanical seals are designed to cater the need of General applications. These seals are supported by Elastomer rubber bellow for general application from light duty chemical handling to water pump application. These seals are very easy to assemble and do not require much of skill to install the seal.



40 MB:
These mechanical seals are designed to cater the need of Specific applications in the area of high temperature operations. Compressions in these seals is caused by Metallic bellow and are useful for high temperature services applications like thermic fluid, hot oil/ Chemicals handling. These seals are working for high temperature up to 350 degree Celsius.

SEAL TYPE	40TB	40RB	40MB
DESIGN FEATURES
APPLICATION	Externally mounted mechanical seal for extremely corrosive an critical services like concentrated acids, alkaliesm salts, etc.	For general purpose light duty chemicals and hydrocarbon fluids.	For high pressure and temperature fluid application.
ROTARY SEAL FACE	GFT, CFT, SiC, Carbon.	C, TC, SiC.	C, TC, SiC.
STATIONARY SEAL FACE	Ceramic, SiC.	C, TC, SiC, Ceramic.	C, TC, SiC.
TEMPERATURE (°C)	120 °C	200 °C	350 °C
PRESSURE	5 bar	10 bar	35
SPEED	3600 RPM	4500 RPM	4500 RPM
AVAILABLE SIZES	0.75" to 2"	0.75" to 3"	0.75" to 3"

Mechanical Seals: 50 SERIES

These mechanical seals are designed to most commonly used applications of fluid services like clean liquids with trace amount foreign particles. This Mechanical seals are also useful where the fluids services are with contamination in trace form. The external mounted multiple spring design of these seals is proven excellent for handling of fluids like clean liquids and gases at various temperature and pressure.

DESIGN FEATURES	-
APPLICATION	Specially designed cartidge seal for pressure vessel and agitators.
ROTARY SEAL FACE	C, TC, SiC,Ceramic.
STATIONARY SEAL FACE	C, TC, SiC, Carbon, STELLITE.
TYPES OF SEALS	TEMPERATURE (°C) 200 PRESSURE 35 bar
SPEED	4500 RPM
AVAILABLE SIZES	2" to 8 "